How to use hydraulic pump

Hydraulic pump is a commonly used hydraulic transmission component used in various mechanical equipment. How to use a hydraulic pump is very important. Correct use can not only extend the service life of the hydraulic pump, but also improve work efficiency. The following will introduce how to use the hydraulic pump.

1. Installation of hydraulic pump

The hydraulic pump should be installed on a stable ground to ensure that the pump body is vertical to the ground. When installing a hydraulic pump, attention should be paid to the inlet and outlet directions of the pump. The inlet should be connected to the hydraulic oil tank, and the outlet should be connected to the hydraulic system. During the installation process, you should check whether the pipeline connections are firm to prevent oil leakage.

2. Starting the hydraulic pump

Before starting the hydraulic pump, you should check whether the oil level of the pump is sufficient and whether the oil quality meets the requirements. When starting the hydraulic pump, you should first open the oil inlet of the fuel tank to fill the pump body with oil, and then start the motor or engine to start the pump. During the startup process, attention should be paid to observing the operation of the pump to ensure the normal operation of the pump.

3. Use of hydraulic pump

When using a hydraulic pump, you should pay attention to the following points:

1. Control the flow and pressure of the hydraulic pump to avoid overload work and damage to the pump body.

2. Regularly check the oil quality of the hydraulic pump to ensure that the quality of the oil meets the requirements.

3. Check the seals of the hydraulic pump regularly. If the seals are found to be worn or aged, they should be replaced in time.

4. When using the hydraulic pump, care should be taken to avoid accidents.

4. Hydraulic pump maintenance

Hydraulic pump maintenance is very important, as it can extend the service life of the hydraulic pump and improve work efficiency. Hydraulic pump maintenance includes the following aspects:

1. Change the oil of the hydraulic pump regularly to ensure that the quality of the oil meets the requirements.

2. Check the seals of the hydraulic pump regularly. If the seals are found to be worn or aged, they should be replaced in time.

3. Check the filter element of the hydraulic pump regularly. If the filter element is found to be blocked or has too much dirt, it should be replaced in time.

4. Regularly check the pump body and pipelines of the hydraulic pump. If the pump body or pipelines are found to be damaged or leaking oil, they should be repaired or replaced in time.

5. When the hydraulic pump is not used for a long time, the oil in the pump body should be drained to avoid deterioration or contamination of the oil.

In short, the use and maintenance of the hydraulic pump are very important to ensure the normal operation of the hydraulic pump, extend the service life of the hydraulic pump and improve work efficiency. When using a hydraulic pump, care should be taken to avoid accidents.